From Heartache to Heart-shaped Leaves: A Complete Guide to Growing Fern-leaf Bleeding Hearts

Table of Contents


Top-rated Gardening Power Tools on Amazon

If you’re looking for an enchanting and low-maintenance addition to your garden, look no further than the Fern-leaf Bleeding Heart (Dicentra eximia). With its delicate, fern-like foliage and vibrant, heart-shaped blooms, this plant is sure to add a touch of whimsy to any outdoor space. In this complete guide, we’ll take you through everything you need to know about growing and caring for this unique and beautiful species.

Benefits of Growing Your Own Fern-leaf Bleeding Heart (Dicentra eximia)

Benefits of growing Fern-leaf Bleeding Heart:

  • Produces delicate pink heart-shaped flowers
  • Tolerates shade and moist soil
  • Attracts pollinators like butterflies and hummingbirds
  • Low maintenance and drought tolerant once established
  • Can be grown in containers or in the ground

General Information About Fern-leaf Bleeding Heart (Dicentra eximia)

Plant Family: Fumariaceae (the fumitory family)
Plant Latin Name: Dicentra eximia

Plant Variations Available

The Fern-leaf Bleeding Heart, scientifically known as Dicentra eximia, is a charming and delicate looking perennial plant. Its fern-like, gray-green leaves are soft and lacy, while its dainty, pink or white flowers blossom in mid to late spring.


Farmer Jer's Trading Post Ad

This plant is native to the eastern United States, and prefers moist, shaded areas in woodlands, meadows, or along streams. It thrives in well-drained soil and can tolerate different pH levels, but does not do well in dry soil.

There are a few variations of the Fern-leaf Bleeding Heart, including the “Alba” cultivar which has pure white flowers, and the “Aurora” cultivar which has deep pink flowers. Another variation is the “Luxuriant” cultivar which has finer-textured leaves and can handle more sunlight.

This plant is a popular choice for shade gardens and woodland settings, and is often used as a border or groundcover. It is also an attractive addition to rock gardens or as a potted plant on a porch or patio.

Important to note, all parts of the Fern-leaf Bleeding Heart plant are toxic if ingested by humans or animals, so caution should be taken when planting and handling this plant. However, it’s beauty and unique foliage make it a standout addition to any garden.

Germinating Fern-leaf Bleeding Heart (Dicentra eximia)

Preferred Zones

Fern-leaf Bleeding Heart (Dicentra eximia) is a beautiful perennial plant that belongs to the Papaveraceae family. If you’re looking to grow this lovely plant in your garden, it’s crucial to find the best zones for outdoor growing.


Top-rated Gardening Carts on Amazon

The Fern-leaf Bleeding Heart thrives in zones 3 to 9, where it can receive partial to full shade. This plant enjoys cooler temperatures and moist, well-draining soil. However, it’s essential to note that it does not tolerate waterlogged soil well.

If you live in a hotter and drier climate, you may want to consider growing the Fern-leaf Bleeding Heart in a pot with rich, porous soil to help retain moisture, and in a shaded area where it can get plenty of moisture without being exposed to the sun’s direct rays.

When planting Fern-leaf Bleeding Heart, make sure to keep the crown at soil level, and water thoroughly to encourage root growth. This plant does not need much maintenance and is relatively pest-free, making it an excellent addition to any garden.

The Fern-leaf Bleeding Heart is a fantastic choice for anyone looking to add a pop of color and texture to their garden. With proper care and attention, this plant will reward you with lovely blooms and lush foliage for seasons to come.

Sowing Instructions

When it comes to sowing Fern-leaf Bleeding Heart, there are a few key things to keep in mind to ensure that your seeds grow into healthy, vibrant plants.

Firstly, timing is crucial. Fern-leaf Bleeding Heart seeds should be sown in the fall, ideally between September and November. This allows the seeds to undergo a period of cold stratification, which is vital for their germination.

Next, it’s important to choose the right location for sowing. Fern-leaf Bleeding Heart prefers partial to full shade and moist, well-draining soil. Make sure the area where you plan to sow your seeds meets these requirements.

When you’re ready to sow the seeds, begin by preparing the soil. Remove any weeds or debris and loosen the soil with a rake or cultivator. Then, scatter the seeds over the soil surface, spacing them about 12 inches apart.

Cover the seeds with a thin layer of soil (about 1/8 inch), and lightly tamp down the soil with your hand or a flat tool. Water the area to help settle the soil and create the ideal conditions for germination.

Once your seeds have germinated, you can expect to see tiny seedlings emerge from the soil within two to three weeks. At this point, you’ll want to thin them out, leaving the strongest seedlings and removing any weaker ones.

As your Fern-leaf Bleeding Heart plants grow, be sure to keep the soil moist but not waterlogged. Fertilize them once a month with a balanced, all-purpose fertilizer to provide them with the nutrients they need to thrive.

By following these tips, you can help ensure that your Fern-leaf Bleeding Heart plants grow strong and healthy, and provide you with beautiful blooms year after year.

Preparation Advice

Are you ready to add a stunning Fern-leaf Bleeding Heart (Dicentra eximia) to your garden? If so, there are a few key things you need to know before getting started.

First and foremost, it’s important to choose the right location for your new plant. Fern-leaf Bleeding Hearts thrive in rich, well-draining soil with partial shade or dappled sunlight. Too much direct sunlight can scorch the delicate foliage, so be sure to select an area that receives shade during the hottest parts of the day.


Top-rated germination on Amazon

Next, you’ll need to invest in some appropriate equipment to ensure your Fern-leaf Bleeding Heart gets off to the best start possible. A shovel, trowel, and quality potting mix are essential, as is a watering can or hose with a gentle spray nozzle. Pruning shears will come in handy when it’s time to tidy up your plant, and a pair of gardening gloves will protect your hands from scratches and thorns.

When it comes time to plant your Fern-leaf Bleeding Heart, dig a hole slightly deeper than the pot it came in and twice as wide. Gently loosen the roots before setting the plant in the hole, and pack the surrounding soil firmly around the base. Water your new plant deeply, making sure the soil is thoroughly moistened.

While Fern-leaf Bleeding Hearts don’t require excessive amounts of fertilizer, you can give them a boost in early spring with a slow-release granular fertilizer. Be sure to follow the instructions on the package carefully and avoid over-fertilizing.

Finally, make sure to monitor your Fern-leaf Bleeding Heart regularly for pests and diseases. Aphids, spider mites, and slugs are common culprits, and can be dealt with using natural control methods or insecticidal soap. If you notice any signs of leaf blight, leaf spot, or powdery mildew, trim affected leaves and dispose of them to prevent further spread.

By following these tips and investing in the right equipment, you’ll be well on your way to enjoying a healthy and vibrant Fern-leaf Bleeding Heart in your garden. Happy planting!

Germination Tools and Equipment

When it comes to germinating Fern-leaf Bleeding Heart seeds, there are a few tools and pieces of equipment that can help you achieve a healthy, successful outcome.

First and foremost, you’ll need quality seed starting soil or a seed starting mix. This type of soil is formulated to provide a light, airy texture and the proper nutrients needed for successful seed germination.


Top-rated plant lights on Amazon

Next, you’ll need a container in which to plant your seeds. When choosing a container, opt for something with drainage holes to prevent overwatering and ensure adequate soil moisture levels. Small plastic cell packs or peat pots work well for Fern-leaf Bleeding Heart seeds.

You’ll also need a clear plastic dome or plastic wrap to create a humid environment for your seeds to germinate in. This will also help retain moisture in the soil, which is crucial for successful seed germination.

To help control temperature and provide adequate lighting, consider investing in a propagation mat and/or grow light. Fern-leaf Bleeding Heart seeds germinate best in soil temperatures around 60-70°F and need 12-16 hours of light per day.

Finally, be sure to label your containers with the plant name and date of planting. This will help you keep track of your progress and ensure you don’t accidentally discard anything that might be slower to germinate or grow.


Top-rated DIY Greenhouses on Amazon

By using these tools and equipment, along with proper care and attention, you can successfully germinate Fern-leaf Bleeding Heart seeds and enjoy the beauty of these delicate, fern-like plants in your garden.

Growing Fern-leaf Bleeding Heart (Dicentra eximia)

Light Requirements

When it comes to providing the perfect lighting conditions for your Fern-leaf Bleeding Heart, there are a few things you need to consider to ensure your plant thrives.

First and foremost, it’s important to note that Fern-leaf Bleeding Heart is a shade-loving plant that prefers partial to full shade. While it can tolerate some direct sunlight, prolonged exposure to bright, intense light can cause the leaves to scorch and wilt. Therefore, it’s best to keep your plant in a shady spot where it can receive dappled sunlight or morning sun.

If you’re growing your Fern-leaf Bleeding Heart indoors, it’s crucial to place it near a bright, filtered light source such as a north or east-facing window. Avoid placing it too close to a south or west-facing window, as these areas receive too much direct sunlight and can cause the plant to suffer.

When it comes to the duration of light exposure, Fern-leaf Bleeding Heart typically needs around 6 to 8 hours of light per day. This can be achieved by using a timer to regulate the light cycle if you’re growing it indoors or by simply ensuring it’s in a shady area that receives adequate natural light if you’re growing it outside.

In summary, providing the right lighting for your Fern-leaf Bleeding Heart is all about finding the perfect balance between shade and sunlight. Keep it in a shady spot, provide it with enough light, but avoid exposing it to direct and intense sunlight for prolonged periods as this can damage the plant. With these simple tips, you can ensure your Fern-leaf Bleeding Heart thrives and adds a touch of natural beauty to your indoor or outdoor space.

Temperature Requirements

To grow a healthy Fern-leaf Bleeding Heart (Dicentra eximia), you will need to consider the temperature requirements of this delicate plant.

This species is native to the eastern United States and prefers to grow in cool and moist environments. Ideally, the temperature range for Fern-leaf Bleeding Heart should be between 50°F and 70°F.

When the temperature goes higher than 70°F, this plant may experience heat stress, wilt, and even die. Therefore, it’s important to keep it in a shaded area during the hot summer months, particularly in the southern regions.


Top-rated Planting Soils on Amazon

In the winter, Fern-leaf Bleeding Heart requires a dormant period, during which it will become dormant and die back to the ground. This is known as ‘summer dormancy.’ During this period, you should try to keep the plant dry, and make sure it is protected from freezing temperatures.

In conclusion, if you want to grow a healthy Fern-leaf Bleeding Heart, it’s essential to provide it with the right temperature range. Ensure the plant receives cool temperatures between 50°F and 70°F, protect it from hot summer temperatures, and make sure it is dormant during the winter. By following these guidelines, you can enjoy the beauty of this lovely plant all year long.

My Favorite Tools For Growing Fern-leaf Bleeding Heart (Dicentra eximia)

Caring for a Fern-leaf Bleeding Heart can be an enjoyable and rewarding experience for any plant enthusiast. However, to ensure that your plant thrives and remains healthy, there are a few essential tools and equipment that you should have at your disposal.

Firstly, a high-quality soil mix is crucial. Fern-leaf Bleeding Hearts prefer slightly acidic soil with good drainage. You can either purchase a pre-made soil mix or create your own by mixing equal parts of peat moss, perlite, and compost. Mixing in some sand can also help improve drainage.

Secondly, a watering can with a gentle spout is necessary to ensure that you don’t overwater or damage the leaves of your bleeding heart. It’s best to water your plant once a week, making sure that the soil is moist but not waterlogged.

Thirdly, a pair of pruning shears is useful for removing any dead or diseased leaves or flowers. This will not only help maintain the plant’s appearance but also promote healthy growth.

Lastly, some organic fertilizer or compost is beneficial to provide your bleeding heart with the necessary nutrients for growth. You can also choose to add some bone meal or a balanced fertilizer in the spring to encourage blooming.


Top-rated Watering Cans on Amazon

Overall, taking good care of your Fern-leaf Bleeding Heart requires attention to detail, patience, and a bit of tender loving care. With these essential tools and equipment on hand, you can ensure that your plant thrives and remains healthy for years to come.

Preferred Soil Type

When it comes to cultivating thriving Fern-leaf Bleeding Heart (Dicentra eximia) plants, getting the soil conditions just right is key. Known for their delicate, heart-shaped flowers and lush green foliage, these perennials thrive in rich, organic soil with excellent drainage.

Ideally, the soil for Fern-leaf Bleeding Heart plants should be slightly acidic, with a pH range of 5.5 to 6.5. This can be achieved by adding organic matter such as compost, leaf litter, or well-aged manure before planting.

It’s important to note that these plants don’t do well in heavy, clay soils or waterlogged soil. This is because their roots require sufficient air circulation to function properly. If your soil doesn’t drain well, you can amend it by adding sand, perlite, or vermiculite to help improve drainage.

Fern-leaf Bleeding Heart plants also benefit from regular fertilization to promote healthy growth and abundant blooms. You can add a slow-release fertilizer before planting or use a liquid fertilizer during the growing season.


Top-rated Fertilizers on Amazon

Lastly, given that these plants are native to wooded areas, it’s best to grow them in partial shade or filtered sunlight. In fact, direct sunlight for extended periods can scorch their leaves and cause the plants to dry up.

By providing your Fern-leaf Bleeding Heart plants with the right soil conditions, you’ll help ensure they not only survive but thrive for years to come!

Watering Requirements

If you’re looking to add a touch of unique beauty to your garden, the Fern-leaf Bleeding Heart is an excellent choice. However, like any plant, it requires a certain amount of care and attention to thrive.

When it comes to watering the Fern-leaf Bleeding Heart, it’s essential to strike a balance between too much and too little. Ideally, you want to keep the soil consistently moist without over-saturating it. A good rule of thumb is to water your plant thoroughly once per week. However, if you live in a particularly dry climate, you may need to water more frequently.

It’s crucial to ensure that the plant is getting enough water, particularly during the summer months, where the heat can quickly dry out the soil. Simultaneously, you don’t want to water your plant so much that it becomes waterlogged, which can lead to root rot.

A handy tip for watering your Fern-leaf Bleeding Heart is to check the soil’s moisture level regularly. If the top couple of inches of soil feel dry to the touch, it’s time to water. To avoid overwatering, make sure the soil has drained adequately before applying more water.

Another essential consideration when watering your Fern-leaf Bleeding Heart is the time of day. Early morning or late evening is the ideal time to water, as this allows enough time for the plant to absorb the water before the heat of the day sets in.

Overall, ensuring your Fern-leaf Bleeding Heart receives the right amount of water is crucial to its success. With a little care and attention, your beautiful plant will thrive and bring joy to your garden for years to come.

What You Need To Know About Fertilizing Fern-leaf Bleeding Heart (Dicentra eximia)

If you have a Fern-leaf Bleeding Heart (Dicentra eximia) in your garden, you might be wondering about its fertilizing requirements. Well, you’re in luck because we’ve got all the information you need!

First, it’s important to understand that Fern-leaf Bleeding Hearts prefer slightly acidic soil with a pH between 6.0 and 6.5. If your soil is too alkaline, you may need to amend it with sulfur or iron sulfate. pH levels outside of this range can prevent plants from absorbing vital nutrients, so it’s important to test your soil regularly.

When it comes to fertilizing, Fern-leaf Bleeding Hearts don’t need a lot of extra food. In fact, over-fertilization can cause them to produce weak, spindly growth. A general rule of thumb is to fertilize once in the spring just as new growth begins to emerge, and once again in mid-summer.


Top-rated Gardening Kits on Amazon

A balanced, slow-release fertilizer with equal parts of nitrogen, phosphorus, and potassium is ideal for these plants. You can also use organic fertilizers such as compost or well-rotted manure to improve soil texture and fertility.

When applying fertilizer, be sure to follow the package instructions carefully, and never apply more than the recommended amount. Too much fertilizer can burn the roots and damage the plant.

In addition to fertilizing, Fern-leaf Bleeding Hearts benefit from regular watering, particularly during hot, dry spells. They also prefer partial shade and moist, well-draining soil.

Overall, fertilizing Fern-leaf Bleeding Hearts is relatively easy as they don’t require much extra nutrition. Just remember to test your soil regularly, apply fertilizer in moderation, and water your plants consistently to keep them healthy and happy.

My Favorite Fertilizers For Fern-leaf Bleeding Heart (Dicentra eximia)

When it comes to fertilizing your Fern-leaf Bleeding Heart (Dicentra eximia), it is important to keep in mind that this particular plant thrives in moist, well-draining soils that are rich in organic matter. As such, the fertilizers you choose should be highly soluble and able to penetrate through the soil without creating any blockages or impediments to growth.

One of the best fertilizers for Fern-leaf Bleeding Heart is a balanced, slow-release fertilizer that contains equal amounts of nitrogen, phosphorus, and potassium (NPK). These nutrients are essential for the plant’s growth and development and will help to ensure that your Bleeding Heart is receiving the proper nutrition it needs to stay healthy and robust.

Another great option is a liquid fertilizer that is specifically formulated for flowering plants. These types of fertilizers are typically high in phosphorus and other essential nutrients that promote healthy blooming and flowering. To ensure even more success, consider using an organic liquid fertilizer such as fish emulsion, which is highly concentrated and provides a wide range of beneficial nutrients and minerals.

Ultimately, the best fertilizer for your Fern-leaf Bleeding Heart will depend on the specific needs of your plant, as well as your personal preferences and gardening style. Whether you choose a slow-release granular fertilizer, a liquid fertilizer, or an organic option, be sure to follow the instructions carefully and avoid over-fertilizing, as this can actually harm your plant rather than help it. With a little bit of care and attention, your Fern-leaf Bleeding Heart is sure to thrive and flourish.

Harvesting Fern-leaf Bleeding Heart (Dicentra eximia)

Time To Maturity

The Fern-leaf Bleeding Heart, also known as Dicentra eximia, is a stunning perennial plant that blooms in the spring and summer months. If you’re considering planting this beautiful plant, one of the most important things to know is its growth rate, from sprouting to maturity.

Firstly, it is worth noting that the Fern-leaf Bleeding Heart is a slow-growing plant. It typically takes about two to three years for it to reach full maturity, depending on growing conditions. However, once established, it can live for many years and will continue to thrive with proper care.

The bleeding heart plant begins its life as a small, delicate sprout. In the first year, it will only produce a few sets of leaves and may not even bloom. During the second year, it will reach a more significant size and will start to produce its signature heart-shaped flowers.

By the third year, the plant should be fully matured, with a well-established root system and a sturdy stem. At this point, it should produce a profusion of blooms that will continue throughout the growing season.

Overall, the Fern-leaf Bleeding Heart is a beautiful plant that is worth waiting for. While it may take a bit longer to reach maturity, the reward is a stunning and long-lasting display of delicate flowers. So if you’re thinking of planting this lovely perennial, be patient, provide it with the right conditions, and watch as it slowly but surely grows into a true garden gem.

Harvest Instructions

Harvesting Fern-leaf Bleeding Heart (Dicentra eximia)

If you are looking to harvest Fern-leaf Bleeding Heart (Dicentra eximia), there are a few things to keep in mind to ensure that the plant is healthy and that you obtain the best results.

First and foremost, it is essential to identify the correct time to harvest this plant. Typically, the best time to harvest Fern-leaf Bleeding Heart is in the early morning, just after the dew has dried, and before the sun’s intensity increases.

Next, you’ll want to find a healthy plant with well-established roots. The best way to ensure that the plant is healthy is to look for signs of good health, such as vibrant green foliage, firm and sturdy stems, and an overall healthy appearance.

Once you have identified a healthy plant, you can begin the harvesting process. Begin by carefully pulling up the plant to expose the roots. Gently dig around the root system to ensure that you retrieve as much of the root system as possible.

Then, use a sharp, clean knife or scissors to cut away any damaged or dead plant material, such as leaves or stems. This will help to promote healthy regrowth after the plant is replanted.


Top-rated Gardening Grow Tents on Amazon

Finally, carefully wrap the root system in damp paper towels or a damp cloth, and place it in a plastic bag. This will help keep the roots moist and protected during transportation.

When replanting Fern-leaf Bleeding Heart, be sure to choose a location that receives plenty of partial shade and moist soil. Plant the root system in a hole that is roughly twice the size of the root ball, and water thoroughly after planting.

By following these simple steps, you’ll be able to harvest and replant Fern-leaf Bleeding Heart successfully, ensuring that you can enjoy this beautiful and delicate plant for years to come.

My Favorite Tools For Harvest Time

Harvesting fern-leaf bleeding hearts can be a pleasant and fruitful experience if you have the right tools and equipment at your disposal. Here are some essentials that you should consider having when preparing to harvest these beautiful blooms.

1. Pruning Shears: These are an essential tool for any gardener, but especially when harvesting fern-leaf bleeding hearts. You’ll need to trim the stems just above the leaf joint, without cutting the foliage. A nice, clean cut will ensure that the plant remains healthy and vigorous, while also allowing for regrowth and potentially more flowers.

2. Picking Basket or Bag: You’ll need something to put your harvested fern-leaf bleeding hearts in, and a basket or bag can make the process much more convenient. Avoid using plastic or anything that could damage the delicate blooms, and instead opt for open-weave baskets or soft-sided bags.

3. Lightweight Gloves: Gardening gloves can be helpful for harvesting as they protect your hands from pricks and scratches, and can improve your grip. Choose a lightweight, breathable material that will keep you comfortable for long harvests.

4. Sun Protection: With their delicate foliage, fern-leaf bleeding hearts are a shade-loving perennial, but that doesn’t mean you won’t need sun protection when harvesting. Wear a hat or visor, and opt for clothing that covers your shoulders and provides ample protection from the sun’s harmful rays.

5. Water Bottle: Finally, don’t forget to stay hydrated! Harvesting can be hot and tiring work, so make sure you have a water bottle on hand to keep you refreshed and healthy.

By having these tools and equipment ready, you’ll be well-equipped to harvest your fern-leaf bleeding hearts safely and efficiently. Happy harvesting!

End of Season & Overwintering

Ah, the lovely Fern-leaf Bleeding Heart! This plant truly lives up to its name with its delicate, fern-like foliage and dainty pink and white heart-shaped flowers. As the end of the growing season approaches, you might start wondering what to do with this beauty to ensure it comes back strong next year. Fear not, as I have some tips for end of season care and overwintering of your Fern-leaf Bleeding Heart.

First and foremost, it’s important to deadhead your plant regularly throughout the blooming season. This means removing any spent flowers as soon as possible. Doing so will help promote continued flowering throughout the season and also prevent the plant from setting seeds, which can take energy away from the active blooms.

When fall rolls around, the foliage of the Fern-leaf Bleeding Heart will start to die back naturally. It’s best to allow this process to happen without intervention, as the plant is storing energy in its roots to prepare for the following spring. However, if the foliage becomes unsightly or disease-ridden, feel free to carefully remove it with clean, sharp tools.

As for overwintering, the Fern-leaf Bleeding Heart is hardy in zones 3-9, meaning it can tolerate some pretty chilly temperatures. However, if you live in a particularly harsh winter zone, you may want to consider winterizing your plant with a layer of mulch or a protective covering of burlap. This will help insulate the roots and prevent damage from frost or freeze-thaw cycles.

Come spring, your Fern-leaf Bleeding Heart will begin to emerge from its winter slumber with renewed vigor. Be sure to provide it with regular water and a light application of fertilizer to encourage healthy growth. With just a little bit of end of season care and some thoughtful overwintering tactics, you can enjoy the beauty of this gorgeous plant for years to come.

Final Thoughts on Fern-leaf Bleeding Heart (Dicentra eximia)

Congratulations! You have reached the end of our complete guide to germinating, growing, and harvesting Fern-leaf Bleeding Heart (Dicentra eximia.) Through this journey, you have learned about the necessary soil conditions, lighting requirements, and watering schedules for this delicate plant. You have also discovered how to propagate it with proper care and attention.

Now that you have all this knowledge, it’s time to put it to work and grow the best Fern-leaf Bleeding Heart you can. Remember to keep an eye on your plant and ensure it receives the necessary care and attention it needs to thrive.

We hope this guide has been helpful, informative, and has inspired you to start experimenting with different types of plants in your garden. As always, we encourage you to continue your research and share your experiences with other gardening enthusiasts. Happy growing!

Frequently Asked Questions About Growing Fern-leaf Bleeding Heart (Dicentra eximia)

1. How much sunlight does the Fern-leaf Bleeding Heart need to grow?
Answer: The Fern-leaf Bleeding Heart prefers partial shade to full shade. It thrives in soil that is moist and well-drained, so make sure to water it regularly to ensure proper growth.

2. When is the best time to plant Fern-leaf Bleeding Heart?
Answer: The ideal time to plant Fern-leaf Bleeding Heart is in the fall or early spring. This plant requires a cool and moist environment, which is the perfect condition during these times.

3. How do I care for Fern-leaf Bleeding Heart during winter?
Answer: Fern-leaf Bleeding Heart is hardy in USDA Zones 3-9, which means it can survive in colder climates. During winter, make sure to protect the plant from harsh winter winds and frost by mulching the soil around the base of the plant. Additionally, reduce watering during winter months to help the plant go dormant and conserve energy.

Keep reading more gardening greats:

Keep reading more gardening greats:

Perfect Perennials? Read These:


Top-rated Gardening Stools on Amazon

More Perennials? Yes, Please!

Scroll to Top